← Fluid Management

Mixing & Recycling All-in-One Mud System — Mixing Systems

Review mixing & recycling all-in-one mud system as part of your mixing systems selection. Identify the mating components and intended application before asking for a configuration-specific quotation.

Ask about this product ↗
Mixing & Recycling All-in-One Mud System — Mixing Systems

Define the circuit

For mixing & recycling all-in-one mud system, explain the required flow, pressure and fluid properties, and whether it will feed the rig, prepare fresh fluid or recover returns.

Plan the installation

Confirm the available power, footprint, suction conditions and inlet/outlet connections. Ask the supplier to identify included tanks, pumps, controls and separation stages.

Review the proposed duty

A product name does not establish system capacity. Request the configuration drawing, duty basis and included accessories in writing.

Technical reference

These values come from the existing product reference. Confirm them against the approved specification; they are not independently verified operating instructions.

Mud feed pump 11 kW submersible pump with alloy shell and impeller
Shaker screens Two layers; upper and lower screens 750 x 800 mm; flat or wave options
Hydrocyclones Four 4-inch units
Vibrating motors / mode 2 x 0.75 kW / linear
Recycling capacity Up to 60 m³/h at slurry ratio 1.2 g/cm³ and viscosity 45 s
Mixing capacity Up to 25 m³/h
Reference cut point 0.03 mm (30 μm)
Installed power / mixer 21 kW total / 4 kW mixer
Tank volumes 6 m³ mixing tank / 3 m³ recycling buffer tank
Dimensions / weight 3900 x 2100 x 2500 mm / 2650 kg

Before you request a quote

Does the photograph confirm compatibility?

No. Confirm the drawing, mating component and exact connection. A visual match is only a starting point.

What information should I send?

Include the product reference, machine or assembly details, quantity, destination and inspection or documentation requirements.

Get in touch

Request a quote →