THE SHORT ANSWER
Describe the expected returns and solids information, then request the proposed separation arrangement and processing basis. Compare the complete circuit, included transfer equipment, tanks and discharge boundaries. A headline capacity is not a guarantee of separation performance for an unspecified feed.
Describe the incoming returns before asking for capacity
Begin with the return-flow information available from the project and identify whether it is measured, estimated or still provisional. Describe the ground and solids information available to the technical team. An inquiry that gives only the rig size leaves the supplier to guess what the recycling equipment will actually receive.
Keep the quality of the information visible. A previous project can provide context, but it does not automatically define the next bore’s feed. Ask the supplier which inputs are necessary for its proposal and which assumptions remain conditional. This makes later capacity discussions more meaningful than comparing standalone numbers from unrelated brochures.
Ask what the advertised capacity describes
Request the basis for the offered processing figure: the configuration to which it applies, the assumed feed conditions and the function being described. Distinguish circulation or pump-related figures from a stated separation or treatment basis. If the terminology is unclear, ask for an explanation before ranking offers.
Do not convert a quoted throughput into a promise about every ground condition or a particular recovered-fluid quality. The actual duty needs review against the incoming material and proposed process. Keep those questions with the technical reviewer and ask the supplier to identify what its documentation supports.
Map the recycling circuit and its boundaries
A complete comparison shows how returns reach the package, which functions are included and where material leaves it. Identify the tanks, pumps and separation components in the offered configuration. Where the project requires external equipment or utilities, mark them as buyer-side scope rather than leaving them outside the comparison.
American Augers distinguishes cleaning systems and pump products in its published range, with combined packages also available. That illustrates the importance of checking actual inclusion. It does not define the content of a different supplier’s all-in-one system; the MEJOR offer must itemize its own equipment.
| Circuit boundary | What to define | Document requested |
|---|---|---|
| Feed | Incoming returns and delivery arrangement | Feed assumptions and inlet scope |
| Separation | Proposed stages and components | Configuration and processing basis |
| Holding/transfer | Tank duties and internal movement | Circuit drawing and equipment list |
| Recovered fluid | Destination and required review | Outlet boundary and qualifications |
| Separated material | Handling and discharge arrangement | Supplier/buyer scope split |
Include wear items, access and service information
Ask which configuration-specific consumables or wear components apply and how they are identified. Request the associated operating and service instructions. Avoid selecting replacement items solely because a screen or separation component in a photograph looks similar to one already used on site.
Review the offered layout for the access requirements stated by the supplier. Cleaning, inspection and service need to be considered before the footprint is approved. A compact transport arrangement may not show the space required in operation; ask for the relevant dimensions and have the project team review the actual layout.
MAKE THE NEXT CONVERSATION USEFUL
Bring your reference.
Define the scope together.
Keep equipment review connected to the fluid program
The equipment proposal and the project’s fluid requirements should be reviewed together by the responsible parties. State the intended destination and use of recovered fluid and identify the checks needed for that decision. Equipment naming alone cannot establish that recovered material is suitable for every subsequent duty.
Avoid adding universal disposal or discharge claims to the purchasing brief. The actual project requirements and applicable arrangements must determine that scope. Ask the supplier to define the physical equipment boundaries and keep the project’s material handling and fluid decisions explicit rather than assuming the machine resolves them automatically.
Compare defined processes instead of brochure headings
Before order release, reconcile the feed basis, process configuration, utility requirements and discharge boundaries. Keep the supplier’s exceptions and your unresolved inputs in the comparison. If the expected returns or site arrangement change, request an updated review rather than carrying forward an earlier capacity assumption.
For a MEJOR recovery-system inquiry, send the available feed information, layout and requested functions together. Ask for a process description and itemized equipment response. That gives the buyer a clearer basis for comparing scope and helps the technical team identify which questions must be answered before a proposal is accepted.
BUYER QUESTIONS
A few points to clarify.
Does a larger throughput number guarantee better separation?
No. Compare the stated basis, feed assumptions and actual process configuration.
Is an all-in-one system automatically complete for my site?
No. Identify every equipment and utility boundary and obtain an itemized scope.
Can the system name establish whether recovered fluid can be reused?
No. The actual recovered material and intended duty need the relevant project and fluid review.
Put the guide to work.
Browse the relevant range, then send the reference and requirements you have available.
Recovery System Reference↗Fluid Management↗
Further reading
Manufacturer references provide context. Their specifications and procedures must not be assigned to unrelated products.
- American Augers: mud pumps and cleaning systems ↗